Physical characteristics (20°C – 60% R.H.)
|Appearance||White paste||Specific gravity||1,05 g/cm3|
|Viscosity (Brookfield 25°C)||10.000 mPa.s|
Times (20°C – 60% U.R.)
|Open time||5 – 10’||Walk on||12-24 hours (See notes)|
|Time for setting||1-2 hours||Complete hardening||24-48 hours|
|Yield||50 linear mt with 500ml||Application temp.||> + 10°C|
|Elongation to break||> 200% (extimated value)|
Storage and Labeling
|Storage in original packag. closed at T >+ 10°C||12 months KEEP AWAY FROM FROST||Symbols of risk||NONE|
|when still fresh it can be cleaned just with water, when dry use acetone|
Bottles of 500 ml with pouring lip
Prepara tion of the surface
Take care the surfaces to be treated are well clean and dry.
Cut the ending lip of the bottle with the needed section. Apply Sigil Clack on the male element and immediately proceed to coupling. Once the element is inserted make a weak pressure to improve a continuous seal. For remove exceeding product proceed as follow:
Cleaning after drying: when the sealant is dry remove it by finger or by suitable tool be careful to not scratch or damage the surface. Sigil Clack does not adheres to prefinished coats and it can be easily peeled out without using solvents.
Cleaning immediately: when the sealant is still fresh, take it away by sponge or slightly dump cloth. This operation is adviced when laying prefinished rounded edges elements.
Cleaning after laying.
When it is possible to walk on the floor, clean the surface using the specific cleaner Ready-Pro removing halos and dirt.
- When dry, Sigil Clack becomes transparent.
- Even if the layed elements are set after few hours, we advice to wait at least 12-24 hours before to walk on. During this period the mechanical features grown up and local stress
could affect the continuity of sealing
- In any case follow installation guidelines given by the floor manufacturer
FOR PROFESSIONAL USE ONLY. Strictly respect the information reported on labels and consult the safety data sheet before using the product.
Disposing of waste
Dispose unused product and empty packages according to local in force regulations.