Περιγραφή
Technical data
Physical characteristics (20°C – 60% R.H.) |
|||
| Aspect | Colored or trans. liquid | Specific gravity | 0,980 g/cm3 |
| Viscosity (FORD4) | 10^27^27 | ||
Ratio and time (20°C – 60% U.R.) |
|||
| Touch dry | 10 – 15’ | Complete hardening | 12 – 24 hours |
| Overcoating | 3 – 4 hours | ||
Technical characteristics |
|||
| Application temperature | > + 10oC | VOC content | < 130 g/l |
| Consumption | 10 – 12 m2/lt | Subcat of the product.in accordance with Dir.Eur.42/2004 and specific VOC content limits. | Cat.A/e (WB): 130 g/l (gen2010) |
Storage and Labeling |
|||
| Storage in original closed packaging at ambient temperature | 12 months | Symbols of risk | NONE |
Tools Cleaning |
Water or ADDITIVO IDRO S43 | ||
Dilution |
Water | ||
Packaging |
Cans of 750 ml / 2,5 lt / 10 lt |
||
Application
Prepara tion of the surface
Accurately sand the surface to be treated, completely removing old varnishes. The surface must be clean and dry.
Application
XILOCOLOR can be applied by brush or by spray (pure of diluted with 5% of water). The application must be done following the grain of the wood and without exceeding in the quantity. On new wooden, after the first coat, a slight sanding with fine abrasive paper (220) is recommended after 3-4 hours, to remove possible the wood grain. Then proceed with a second coat.
It is possible to complete the finishing cycle with a third coat of stain or with a coat of waterbased transparent varnish for outside: Xilolak in glossy, semi-glossy or mat version.
N.B.: do no over-varnish if the wax effect stain has been used.
Notes
- Mix before and during use to obtain a uniform surface and coloration.
- Before treating the whole surface is recommended to make some coloration test
- The product contains pigments which absorb UV rays and slow down the natural wood wear.
- It is recommended not to use the product under 10°C.
Safety Rules
FOR PROFESSIONAL USE ONLY. Strictly respect the information reported on the labels and consult safety data sheets before use.
Disposing of waste
Dispose not used product and empty containers in accordance of local in force regulations.
