Description
Technical datas
Chemical-Physical characteristics (20ºC – 60% R.H.) |
|||
| Appearence | Tixotropic paste | Specific gravity | 1,50 g/cm3 |
| Solid content | 85% | Solvents | None |
Times (20°C – 60% Σ.Υ.) |
|||
| Open time | 5’ – 10’ | Hardening rate | 3 – 5 mm for day |
| Overcoating | 24 h | Application temp. | +5 a + 50 °C |
Storage & Labeling |
|||
| Storage (original unopened packaging stored in normal conditions) | 12 mounths KEEP AWAY FROM FREEZE |
Symbols of danger | NONE |
Cleaning tools |
With water just after use | ||
Packaging |
Cartridge of 310 ml – Box of 12 pieces | ||
Application
The surfaces to be treated have to be compact and dust free: remove all traces of lime, grease to allow an optimal adhesion. Damp substrates are also tolerated but not wet ones. To apply the product open the terminal with a 45° cut referring to the joint size, than put the cartridge into the apposite gun. To avoid air inclusion during sealing keep the terminal into extruding product.
After the application smooth with a damp tool before skin formation. Do not use FULLGAP in exterior, on non adsorbent substrates, on plastic surfaces or on high traffic floors.
– N.B.: before coating verify varnish compatibility.
Safety Rules
FOR PROFESSIONAL USE ONLY. Strictly respect the informations reported on the labels and consult safety data sheets before use.
Disposing of waste
Dispose not used product and empty containers in accordance of local in force regulations.
